Quote:
Originally Posted by SteveB
the very first thing I do on a touring rack, prior to connecting ANY cables, is open the door and re-seat the dimmer modules.
Steve B.
|
Not just the dimmers but don't forget to reseat the
CEM. I was teching a rack and the CEM was giving an error about the C phase not working. The phase C neon on the rear of the rack was not lit as well yet metering between any phase and C would give 208V and between neutral would give 120V. Turns out the CEM was not seated all the way and that connection was not made. The neon on the back was just plain burned out.