Thread: Conventional Fixtures Yoke it out
View Single Post
  #8 (permalink)  
Old August 15th, 2008, 08:13 PM
cdub260's Avatar
cdub260 cdub260 is online now
CB Supporter 

Technical Director
 
Join Date: Aug 2008
Location: Southern California
Posts: 517
Thanks: 10
Thanked 15 Times in 15 Posts
Default Re: Yoke it out

I do open side down. If you go the other way, you're putting too much faith in a 1/2 inch bolt. I've actually seen the bolt on a c-clamp bend. That c-clamp is still on one of my light pipes 5 years later. And for the record, no I did not over tighten the thing.

Here's your challenge Serendipity. Find the c-clamp and tell me where it is.
__________________
C.W. Keller
Master Electrician
Pageant of the Masters
Laguna Beach, CA


Always remember: Pillage first, then burn.
Reply With Quote