View Single Post
  #19 (permalink)  
Old August 16th, 2008, 02:56 PM
pmgpriebe pmgpriebe is offline
CB Supporter 

Junior Techie
 
Join Date: Aug 2008
Location: Branson, MO
Posts: 27
Thanks: 1
Thanked 0 Times in 0 Posts
Default Re: Abrazor tool for LeMaitre Neutron XS

Also, there are 2 Blue IIRC Wheels on the circuit board that you can adjust on the Neutron to increase or decrease the output. This is not in the manual, and this is not widely known to my knowledge. If you increase the wheel (I believe by turning it clockwise) it will pump out a noticeably more visual amount of haze, but it will cause it to 'spit' a little more than it use to. We did this for a few of the clubs we have done installs in to help them get the most bang for their buck. You don't have to adjust it much, as if you go to far, it almost puts it at zero.

I don't know if its recommended by Le Maitre, as I have never asked Jim if it damages the unit, but they have no problems that I have seen other than your average element and/or pump replacement over time.
__________________
[ PMG pRiebe ]
Passion.Motivated.Generation

Sales and Marketing Director
www.theatreworks.com


"No, no, no.. A BULB is something you put in the ground, a LAMP is what goes in your fixture"
Reply With Quote