[Sony]

I would personally try and do a Soft Reset on the Pathway node. Reset all the configuration details to the defaults and then reprogram your Node configuration from scratch. I think if you haven't touched anything on the board or the PC then it is unlikely there is anything wrong with them. If that doesn't work then try a Hard Reset. The manual should tell you how to do this. This however does sound to me like something is crosswired somewhere ether in the node or the board configuration. Did you check all the board settings? Just doublecheck that the board is configured to output all the Moving Light info on Universe 3. It could be that when they were diagnosing and fixing the problem they messed with the configuration in the board.

Just a thought