Quote:
|
Originally Posted by ccfan213
if anyone knows what my problem is or how to fix it please help me im desperate
|
Well, if you are having difficulty following the circut path like mbenenois suggested, its a good idea to reset your board settings to figure things out from scratch.
Make sure.....................................
Submasters are down.
Aux sends are down (temporarily).
Disconnect any inserts or alternate cables that may be plugged into each
channel.
If it's a mackie board, (or one with this functionality) make sure any tape sends are turned down, or that the "Tape Return to Main Mix" button is OFF.
Then test these:
Try lowering and raising your main mix fader. Make a difference?
Try bring any active AUxes up, one by one. Anything?
Try changing channels to an unused one.
Try unplugging and replugging speaker sends and aux sends (when the amplifiers are off
)
Personally, when I start to have wacky things happen to my monitor, side fill, or main mix sends, I usually just need to spend an hour or two, and reset all of the levels.