Quote:
Originally Posted by lighttechie5948
Actually wait is for:
Hit Go, Cue 2 starts to upfade, but waits 15 secs to downfade cue 1
|
Well, yes, sort of...
From
ETC's Express manual: "Wait time is the time that elapses between when you press [Go] and when the actual fade begins."
You're talking about what would be described as a split crossfade. You'd achieve that by putting a WAIT time on the DOWN TIME.
There are lots of uses for waits. Everything from coordination of timing between lights and other departments to complex cue sequences.
--Sean