Thread: Changing a mirror on a scanner
View Single Post
  #2 (permalink)  
Old November 8th, 2007, 04:48 PM
BillESC BillESC is online now

Technical Director
  
Join Date: Aug 2005
Location: Kilmarnock, VA
Posts: 683
Thanks: 24
Thanked 17 Times in 16 Posts
Default Re: Changing a mirror on a scanner
Quote:
Originally Posted by JohnA View Post
Greetings to all,
I have an Amenrican DJ Accu Scan 250, which is a 250w discharge lamp "lower end" scanner. The mirror has cracked on the unit--but the unit wss NOT dropped. I have a replacement mirror on the way, but need any tips concerning removal of the old/installation of the new. I would be grateful for any suggestions (other than contactng AMDJ please).
Thanks--John A
I'm not certain but if it is like most ADJ scanners it is a replacement assembly. usually an Allen wrench is used to loosen one or two set screws and the assembly slides of the motor.
__________________
Thanks,
Bill - ESC
Entertainment Systems Corporation
Innovative production assistance since 1973
Sales - Rentals - Design - Consulting
800-582-2421 - bill@entsyscorp.com
Reply With Quote