View Single Post
  #1 (permalink)  
Old December 30th, 2007, 02:42 AM
gafftaper's Avatar
gafftaper gafftaper is online now
half wisdom and half-wit
CB Supporter 

Technical Director
 
Join Date: Jan 2006
Location: Seattle Washington
Posts: 5,005
Thanks: 37
Thanked 156 Times in 129 Posts
Default Tricks for storing gear in catwalks?

The new black box has a catwalk system. It's 5 seperate catwalks that cross the space plus a connection walk on each end all in a nice larger square. The only way up and down is via a steep ship's ladder. I'm looking at it trying to figure out a SAFE way to store things like spare cable, lens tubes, and top hats, up in the catwalks instead of hauling it up and down.

I don't want to just bundle cable and lay it on the floor as that's a trip hazzard. There are lots of pipes all over the place and I was thinking I could get a piece of unistrut and hang it at shoulder height along one of the end walks then devise some sort of system of hooks to attach to the unistrut for hanging power and DMX cable.

I was also pondering what to do with top hats and spare lens tubes... I was thinking a shelf about 12" deep and 36" high. Installed on the far cross over of catwalk... still leaves 24" to walk past it. U-bolt through the back of the shelf to the hand rail so it can't fall. Install some shock cord across the front of each shelf to keep things from falling.

There are definite safety issues here but If things are well bolted and steps are taken to prevent things falling... I think it can be made safe. Has anyone seen this sort of thing? Is it just a bad idea?
__________________
Community College Technical Director
If you have learned as much from CB as I have, donate now to keep CB alive for others to find and learn from.

Last edited by gafftaper; December 30th, 2007 at 02:46 AM..
Reply With Quote
Sponsored Links