View Single Post
  #6 (permalink)  
Old July 22nd, 2008, 11:05 AM
ishboo ishboo is offline
CB Supporter 

Techie
 
Join Date: May 2008
Location: Centerville, Ohio
Posts: 113
Thanks: 3
Thanked 2 Times in 2 Posts
Default Re: Direct Feed from Camcorder to Projector

If you need to send the signal a long distance try getting an A/V out cord (you could get one on ebay for a few bucks) almost every camcorder has an out for those, and then get an RF Modulator which takes the AV signal and turns it into an RF (coaxial signal). Coaxial Cable is really cheap and can go long distances then just put another RF Modulator on the other end (an old vcr can also double as an RF Modulator. We did a setup like this for our talent show so the performers in the greenroom could see what was going on and it worked out great.
__________________
Golden rule of Theatre: Anything an actor can trip over an actor will trip over.
Mom... Dad... I'm a Thespian
Reply With Quote