Go Back   ControlBooth > CB Discussions > General Advice
 
    Advanced Search

Notices

General Advice General tips, tricks, and rules that every technician should know.


Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old August 1st, 2009, 01:48 AM
Senior Team
 Premium Member 
 
Join Date: Mar 2003
Location: Illinois
Posts: 4,419
Thanks: 5
Thanked 81 Times in 66 Posts
Default Next work boot asking about

So I’m a firm believer in work boots as opposed to gym shoes at work. Way too many nails thru the sole and or slips at work to be having anything other than. This much less slips or falling objects at times. Why am I making noise as I walk, I pull out a staple that will have fully penetrated a gym shoe.

Of like the last 15 years it’s more like hiking/mountain climbing boots as opposed to specific work boots. Lighter and I loved that Eastern Mountain Sports center support to the sole that wold prove useful if on a ladder all day long in not tiring the foot by way of the foot supported as opposed to curling around the ladder step. Don’t much climb ladders these days and to replace a pair that lasted like eight years I bought a pair from REI. Lasted about a few months before I was epoxying parts of the rubber back to the leather. Lasted almost a year now before the soles of the things developed cracks across the bend points of the foot. This much less became uncomfortable in having on and in adding insoles too hot at times or during long periods.

Just couldn’t replace what I had and I’m not about to go back to combat boots I had before the hiking boots.

So now I’m starting to look towards work boots. Liking the light weight hiking boots and wear them seven days a week, but it would seem they just don’t make them like they used to.

Balance for me at the moment is new table saw blade - a good one, router table or new boots in given the current boots only lasted about a year, thinking I can deal with them a little longer even if the sole is warn away and there is deep cracks. This as opposed to important stuff in getting stuff done.

Timberland Pro Endurance catches my interest at the moment. Ideas? This given I less climb ladders but do at times, and more walk about concrete floors five days a week and it tends to wear on the boot. This much less I wear work boots seven days a week unless special occasion. Light weight is a good thing as I still remember the good feeling at night as I dropped off my combat boots once I got home. Years hense dropping off the boots once home from work ain’t appropriate as once home the real work starts.
At least six hours time a night once home to get stuff done and often more intresting than what was done at work. Boots stay on until ready for bed most often seven days a week.

Perhaps its just me of a combat boot and or real work boot generation as per high tops are not even much seen these days. Still though I wear such boots like 16 hours a day seven days a week.

What you wear might not be persay the perfect pair for me in switching and finding something new, but on the other hand, given the hiking boots are trash, what do you find for work or hiking type boots to work best? Leaning towards the Timberland Pro Endurance at the moment espcially given midsole feature but I no longer know what to look for. This beyond REI home brand of Vasque or Vibram lasted me about a year at best in daily use. Not A good work boot given they cost just short of $300.00. Comfortable for the most part and light weight yes for the most of them months, but only a year... not so cost effective.
Reply With Quote
Old August 1st, 2009, 01:57 AM
 Premium Member 

 
Join Date: May 2009
Location: Los Angeles
Posts: 55
Thanks: 0
Thanked 1 Time in 1 Post
Smiley Re: Next work boot asking about

Love my Timberland Pro Endurance work boots. specifically: Men's Endurance PR 6 Inch Steel Toe Briar Full-Grain Style #52562

Steel toe, shank - that let's me go on highly controlled job sites when I'm commissioning new systems, ladder lock - check, electrically rated - always handy while walking on power cable at your local studio, special rubber-weld thingies front and back - always good when working on equipment as my last boots had holes worn through the toes.

Timberland Pro Endurance - highly recommended and free return shipping if you don't like them. I always wait for free shipping coupons like the SHIP100 one or 20-30% off coupons.
__________________
Cheers,

Maurice Garcia
www.dimmer.com
www.savemycd80.com
Reply With Quote
Old August 1st, 2009, 10:33 PM

 
Join Date: Jan 2009
Location: Christchurch, New Zealand
Posts: 138
Thanks: 0
Thanked 4 Times in 4 Posts
Default Re: Next work boot asking about

I've got a pair of Magnum Classic boots which I absolutely love. They don't have steelcaps, but have a composite toecap which isn't rated like a steelie but still protects your toes. I think a lot of emergency and rescue workers (certainly in Britain) use them; they're incredibly comfortable (although mine did take a week of constant wear to break in) and not particularly heavy - I'm 5 foot nothing so lightweight boots are important to me! I've had mine 4 years now and they're still in pretty good condition apart from being very beaten up around the toes, but that's cosmetic damage only.
Reply With Quote
Old August 4th, 2009, 02:29 AM
Senior Team
 Premium Member 
 
Join Date: Mar 2003
Location: Illinois
Posts: 4,419
Thanks: 5
Thanked 81 Times in 66 Posts
Default Re: Next work boot asking about

Quote:
Originally Posted by kiwitechgirl View Post
I've got a pair of Magnum Classic boots which I absolutely love. They don't have steelcaps, but have a composite toecap which isn't rated like a steelie but still protects your toes. I think a lot of emergency and rescue workers (certainly in Britain) use them; they're incredibly comfortable (although mine did take a week of constant wear to break in) and not particularly heavy - I'm 5 foot nothing so lightweight boots are important to me! I've had mine 4 years now and they're still in pretty good condition apart from being very beaten up around the toes, but that's cosmetic damage only.
Thanks in both by way of me mostly flying a desk or work table these days but me preferring the work boot or hiking boot as it were. Will check further into both.
Reply With Quote
Old August 4th, 2009, 04:21 PM
cdub260's Avatar
CBmod
 Premium Member 
 
Join Date: Aug 2008
Location: Southern California
Posts: 944
Thanks: 12
Thanked 33 Times in 33 Posts
Default Re: Next work boot asking about

I wear Red Wing EH rated (Electrical Hazard Rated) work boots. Since my job occasionally requires me to work in live electrical panels, the EH rating is mandatory for me.

Now at about $200.00 a pair, these are not cheap by any stretch of the imagination, but I think they are worth the expense for several reasons. First up is comfort. Once I've gotten through the one or two week breaking in period, these boots have been extremely comfortable, allowing me to stay on my feet for extended periods of time. As for durability, the shortest amount of time a pair of Red Wings has lasted for me is three years. Usually I get more on the lines of five to seven years. Adding to the durability is the fact that you can get these boots resoled. When the soles start to get a little thin, take them back in to the Red Wing store and two weeks later you get your boots back with a brand new sole. The last time I got a pair of boots resoled it cost me about $80.00 and extended the life of the boots by roughly two years. Minor repair and maintenance issues are taken care of by Red Wing at no cost to you. They will replace your laces free of charge for the lifetime of the boot. If your boots need oiling you can just take them back to the Red Wing store and they will oil them for you for free. The stitching on the boots is guaranteed for life. If the stitching on the boots ever starts to come apart, take the boots in and they will repair it, again at no cost to you.

One final reason why I wear Red Wings is that at a 12B I am a hard size to find. If they don't have my size on hand they can order direct from the factory, meaning I don't have to settle for close enough on the fit of my work boots.

And that's my 2 cents on the subject of work boots.
__________________
C.W. Keller
Master Electrician
Pageant of the Masters
Laguna Beach, CA

[email address]

Always remember: Pillage first, then burn.
Reply With Quote
Old August 11th, 2009, 01:53 AM
Senior Team
 Premium Member 
 
Join Date: Mar 2003
Location: Illinois
Posts: 4,419
Thanks: 5
Thanked 81 Times in 66 Posts
Default Re: Next work boot asking about

Thanks all in will also consider Readwing, and me going to Sears this past weekend and while wearing a 9.5R military boot and sticking to it in feet not having shrunk, it would seem I'm a 9.0 wide with the Timberland and that's special order at best if it is the proper size for me.

Curious in where are the Readwing boots offered from in me not yet doing the search. This assuming my Eastern Mountain Sports climbing boots are no longer on the market. Center sole support over that of tip support in my case.
Reply With Quote
Old August 11th, 2009, 02:28 AM
avkid's Avatar
 Premium Member 

 
Join Date: Feb 2004
Location: Endicott, NY
Posts: 4,631
Thanks: 50
Thanked 59 Times in 53 Posts
Blog Entries: 1
Send a message via AIM to avkid Send a message via Skype™ to avkid
Default Re: Next work boot asking about

Red Wing uses local dealers and company stores.

This looks to be about 40 minutes away.

Red Wing Shoe Store
1749 S Randall Rd # D
Geneva, IL 60134-4616
(630) 845-3128‎
__________________
Philip LaDue
Endicott Audio
ADR Audio
"The loudspeaker has more of an effect on the sound we hear than anything else in the audio reproduction chain"- Alan Frank
Reply With Quote
Old August 11th, 2009, 02:43 AM
gafftaper's Avatar
Senior Team
 Premium Member 
 
Join Date: Jan 2006
Location: Seattle, Washington
Posts: 6,652
Thanks: 46
Thanked 231 Times in 191 Posts
Blog Entries: 6
Default Re: Next work boot asking about

It's a little unconventional, but I've got a pair of Sketchers Steel Toe Boots I love. I only wear them once or twice a month... load in, load outs, hauling plywood, so I can't really say how well they handle a daily grind. They Look and feel just like my mid-ankle height hiking boots. Very comfortable, lots of styles to choose from. It Looks like there are a couple of Sketcher factory stores in your area Ship.
__________________
Community College Technical Director
Reply With Quote
Old August 11th, 2009, 08:36 AM
BrianWolfe's Avatar

 
Join Date: Jul 2009
Location: New Windsor, NY
Posts: 75
Thanks: 0
Thanked 8 Times in 6 Posts
Default Re: Next work boot asking about

I bought Timberland Pro waterproof steel toe boots which were beautiful but way too heavy for walking around on concrete all day. After two weeks I returned them for Timberland Pro steel toe low hiking shoe:
Timberland PRO Boots: Mudsill Low Steel Toe Hiking Shoe 40008
They have been great. They are light and comfortable for my wide feet and lasted for two years. I just replaced them last month. At $75 and free shipping they can't be beat.
__________________
Brian Wolfe
General Manager
Costume Armour, Inc.
Props, sculpture, vac-form and resin casting.
Reply With Quote
Old August 11th, 2009, 09:10 AM
len len is online now
 Premium Member 

 
Join Date: Oct 2004
Location: Chicagoland
Posts: 1,397
Thanks: 8
Thanked 32 Times in 28 Posts
Default Re: Next work boot asking about

I wear Skechers Iron Eagles (think that's the model). Very comfortable. But if you're going to wear the same thing 7 days a week, you should be rotating two or better three pairs. A shoe gets moisture in it and needs to dry out. Wearing it every day doesn't allow that to happen. So they wear out much faster when you wear them every day.
__________________
http://www.chicagolightingdesign.com
"I don't feel it's healthy to keep your faults bottled up inside me." - Bucky Katt
Reply With Quote
Reply

Tags
boot, work

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lighting Fixture Maintenance derekleffew Collaborative Articles 0 April 24th, 2009 11:29 PM
careers in theatre ShadowPuppet88 Education 15 January 20th, 2009 10:01 PM
Getting a Job in the Industry gafftaper Collaborative Articles 0 September 22nd, 2008 02:59 PM
SO or SJO & what gauge: replacing asbestos soundlight Lighting 23 December 5th, 2005 07:37 PM
new in chicagoland vguard420 New Member Board 18 June 1st, 2005 11:54 PM


All times are UTC -4. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.1 
Advertisement System V2.6 By   Branden

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80