Go Back   ControlBooth > CB Discussions > General Advice
 
    Advanced Search

Notices

General Advice General tips, tricks, and rules that every technician should know.


Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old October 25th, 2009, 09:53 PM

 
Join Date: Jun 2009
Location: Salisbury,MD
Posts: 303
Thanks: 2
Thanked 8 Times in 8 Posts
Default Re: Lifts

The only time I have questioned an OSHA guy on lift rules was a couple of years ago. I was working in an 85ft lift beside a lagoon with a 6ft max depth. He said he wanted a full body harness plus a life vest in case I hit the water. I explained he wanted me tied to a machine with a vest designed to pop me up and out of the lift. Beside the fact that I could stand up in the water, he was insisting on devices that would work in opposite diections if I did hit the water and could lead to catastrophic injury. My last point was that if I was at height, I would hit the next building. They let me go.
That is not the only run-in or argument I have had with OSHA but they are generally interp discussions. I am certified to certify ops on lifts and forks. I also install permanent safety equipment.
__________________
Michael S. Taylor
Reply With Quote
Old November 7th, 2009, 11:23 PM

 
Join Date: Jan 2008
Location: Rhode Island
Posts: 271
Thanks: 10
Thanked 2 Times in 2 Posts
Send a message via AIM to midgetgreen11
Default Re: Lifts

The lift company came back and said they will not train anyone without a valid driver's license or anyone under the age of 18. We have no access to our coves for this show now. Will the mention of the OSHA code help at all?
__________________
Ben Green
Lighting Designer
Student Technical Director
North Kingstown High School Auditorium
Reply With Quote
Old November 7th, 2009, 11:32 PM
Les Les is offline

 
Join Date: Feb 2004
Location: Dallas, Tx.
Posts: 930
Thanks: 10
Thanked 22 Times in 22 Posts
Send a message via AIM to Les Send a message via Yahoo to Les
Default Re: Lifts

Quote:
Originally Posted by midgetgreen11 View Post
The lift company came back and said they will not train anyone without a valid driver's license or anyone under the age of 18. We have no access to our coves for this show now. Will the mention of the OSHA code help at all?
Probably not. Their lift, their rules. They should have designed your school better.
__________________
Leslie (Les) Deal
Dallas Texas
Reply With Quote
Old November 8th, 2009, 12:25 AM
Footer's Avatar
Senior Team
 Premium Member 
 
Join Date: Nov 2005
Location: Saratoga Springs, NY
Posts: 3,753
Thanks: 1
Thanked 134 Times in 129 Posts
Default Re: Lifts

Your up a creak on this one. Its not an unreasonable request on the part of the lift company. It could be possible to shop around for a company that will let you use it after being trained. If it makes you feel any better, most car rental shops won't let you rent a car until your in your mid 20's. Ok, that does not make you feel better, but...

There was a school in Chicago that had this same access issue. They built catwalks and would not allow the students to go up in them. Somehow they convinced the school to buy them a VL1k to place every 3' across all of their battens that they could not access.
__________________
Kyle Van Sandt
Technical Director
Home Made Theater
Van Sandt Designs
Reply With Quote
Reply

Tags
lifts

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strength of tieline? gafftaper Scenery 18 October 17th, 2009 10:12 PM
looking for affordable crank lifts / trussing KProductions Lighting 20 April 1st, 2009 11:04 AM
Truss on crank lifts Daveslights Lighting 24 May 23rd, 2008 06:34 PM
Fire curtain : was LIFTS legacy Special F/X 3 January 21st, 2008 09:40 AM
Lifts legacy Special F/X 44 November 5th, 2007 11:43 AM


All times are UTC -4. The time now is 10:04 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.1 
Advertisement System V2.6 By   Branden

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80