Control/Dimming - Lighting Console: 24/48

[martinty]

Hi, I am a technical director at a small community theatre in Vancouver, BC. We have a old NSI 7524 console that has finally kicked the bucket. We only need a 24/48 channel board, is there something anyone can recommend? We have purchased new A21 Dimmers, and we wont be using moving lights. I was looking at the Strand 200 24/48. Any suggestions?

[DCATTechie]

Originally Posted by martinty

Hi, I am a technical director at a small community theatre in Vancouver, BC. We have a old NSI 7524 console that has finally kicked the bucket. We only need a 24/48 channel board, is there something anyone can recommend? We have purchased new A21 Dimmers, and we wont be using moving lights. I was looking at the Strand 200 24/48. Any suggestions?

-Will you invest in other DMX toys in the future such as gobo rotators or scrollers?
-Would you like something with a cue stack or would you prefer a 2-scene preset?
-What is your price range?
-Will volunteers be using this board or just trained technical employees?

[TheSwami]

The Strand 200s are dandy; my old high school had one to run the (admittedly minimal) lights in their blackbox. They're pretty intuitive, and durable too - saw more than one freshman board op learn the hard way to carry the board carefully with both hands. The lack of a cue stack is somewhat annoying, but you can always record to submasters and fake it, or just use it as a preset board.

If you can dig one up, I'm a fan of the old Stand 300s. They're out of production now, but they're fairly easy to use with conventionals, and the fade expansion wings for them are relatively cheap. If you can find on online or locally, it's worth a look, particularly if you'll be doing shows with heavy cuing.

There's also ETC's SmartFade console, which is somewhat nicer and newer than the Strands, but perhaps less intuitive to someone used to, say, the Express. ETC makes 12/48, 12/96, and 24/96 versions of the console; you'd probably want the last of these to get closest to your ideal 24/48. Using the cue-stack can feel slow and aggravating at first, as the built-in menu system the SmartFade uses for managing cues isn't particularly intuitive nor simple. It's not impossible to use, and the pass-by-reference nature of the cuing system (each cue actually references a submaster) makes it easy to re-use looks.

I think DCATTechie's on the right track: knowing more about your needs would help others help you. =)

73

[isquint]

Originally Posted by martinty

Hi, I am a technical director at a small community theatre in Vancouver, BC. We have a old NSI 7524 console that has finally kicked the bucket. We only need a 24/48 channel board, is there something anyone can recommend? We have purchased new A21 Dimmers, and we wont be using moving lights. I was looking at the Strand 200 24/48. Any suggestions?

If you an wait till April, after USITT, DO IT!
That is when ETC is announcing their newest board, the element. It will be the direct replacement for the express line of consoles. I think this will be a perfect match for your venue.

[gafftaper]

Again is a two scene preset with submasters all you want? You don't want a programable cue stack with a go button?

If yes then I would go with a Strand 200. A quick search found them for $1400 online. My second choices would be another NSI/Leviton or one of these maybe from EDI

If you want to upgrade to a fully programable console with a go button my current choice for a small theater is the Strand Basic Palette II. Waiting to see what the new ETC console turns out to be like would be wise. We have not had public confirmation that they will announce it at USITT in March. We also don't know how long after it is anounced that they will actually ship. I would say a period of 2-3 months is typical and 6 months isn't unheard of.

Originally Posted by isquint

If you an wait till April, after USITT, DO IT!
That is when ETC is announcing their newest board, the element. It will be the direct replacement for the express line of consoles. I think this will be a perfect match for your venue.

The new ETC console will target the same educational and small theater market that the Express was loved by, but it is NOT a "direct replacement" for the Express. I think CB's own Sarah Clausen is quite clear of that in this post from the ETC blogs when she says, "No it will not be Express 2". ETC has also been quite clear that they are done making 2 scene preset consoles. See this blog post from David Lincecum on ETC's site. Yes it's possible that the new console comes in a 2 scene preset design but given the information in the two blogs above from these two key ETC people, it seems highly unlikely. I expect something that looks like a cross between a Strand Basic Palette and an Ion.

[NickJones]

If it is going to be run by volenteers, and you have minimal budget the Zero88 Jester 12/24 or 24/48 would be Ideal. It is cheap, and super simple, yet allows programming. Would be perfect for what you want.
Zero 88 Lighting. Lighting Control Systems for Entertainment, Stage, Film, Television, Theatre, Schools and Drama is the site. Have a look.
Nick Jones

[gafftaper]

Zero 88 Jester is another great choice but I think it's price is up around $2,500 because it has a programmable cue stack. If you want to move up into that price range and basic programmable cue stack boards you should also check out the EDI Bijou, and the boards from Leprecon.

If you do some searching around here you'll find ugly arguments on what is the best of these lower end boards. We all love Ion, but if you only have $2,000 to spend the debates get ugly (we don't discuss it anymore). You'll find people who hate and love all of these basic 24/48 boards with no clear winner. As far as price I think every board mentioned above is also in the same $1000-$1500 range (with the exception of the Basic Palette at around $4k and the new ETC console... price unknown at this point but will probably be right in the middle of the $3k-$5k range).

I would suggest you take a look at the actual manuals for all of these two scene presets. Read how you program them. Are there features you like better or is the way you use one more logical to you than another in your opinion? There is not a clear difference in quality. So, make your decision based on the one that looks the easiest for you to operate and train others.

[Jeroen]

I think there are several similar boards, with a good price/quality balance.
A Jester, a Smartfade a Tango are all able to be used in 2 scene preset way or with a theatrical style cue stack 'go button'.

My suggestions would be:

Only two-scene preset: ADB Bolero
If you do not need programmable playback and only two-scene LTP use... IMHO not a good idea since you are not prepared for future upgrades in light fixtures you will eventualy buy or complex shows. But a simple two-scene board of premium quality would be the ADB Bolero.

Programmable and two-scene preset
- ADB Tango 48: easy to use board (very common in many European small theatres) adb lighting
Falco TT bvba.

- Zero88 Jester 24/48: The Zero88 Jester is a sturdy board, good design, fiarly easy to use and operate and it has a vga out. On the other side it's limited to 48 channels,
the vga output is text output only (dos style). It does what it has to do.
Zero 88 Lighting. Lighting Control Systems for Entertainment, Stage, Film, Television, Theatre, Schools and Drama

- MA Lightcommander 48/6: a very good quality board, comparable to ADB Tango but with extra features: dedicated submasters, easy programming and playback, several pages with direct access buttons, several operating/user modes. Very good quality two-scene or stack style operation. Easy to learn and straigthforward programming.
[url=http://www.malighting.com/control.html?&tx_lightpowerpdb_pi1[parent_gruppe]=216&cHash=d1811d91e1]

- but for a lower price you can purchase an ETC Smartfade 24/96
The ETC Smartfade, comes in several configs, your choice would be the 24/96 which gives you in two-scene preset mode 24 channels two preset mode. In normal mode you get 96 channels divided over 48 faders (software controlled: two layers with faders). So this little board has even more channels than a way larger and more expensive MA Lightcommander 48/6.


Recently Smartfade is expanded by Smartsoft. Now, you can easily link your Smartfade with a pc using an usb cable.

Smartsoft is impressive and way more than the text vga out from Zero88 Jester. Smartsoft lets you easily patch and unpatch devices, open and save shows or edit board settings like intensity of the leds on the board.

Most important is that ETC added a lot of functionality to the cue and stack list. You can easily program cues and save them to a stack, edit times,... everyone can learn the board and Smartsoft in one day. And you can use it as you like... as a simple two-scene board, or a fully programmable board. For the price it is sold it has a lot power under the hood (way more than the comparable ADB's, Jester's or MA's). It is also packed with a lot of connections (dmx in and out, midi in and out, usb, SD card)
I have to admit that the extra's on the Smartfade and the working of the cue stack is sometimes less straightforward than you should expect, but this board has a rich feature set and for the basic things it's just a matter of minutes to learn them to anyone.

If I would compare those basic consoles I would say:

Build quality: MA **** , ADB ****, Zero88 ***, ETC ***
Learning Curve: MA **, ADB ***, Zero88 ***, ETC **
Ease of use: MA ***, ADB **, Zero88 ***, ETC ***
Features: MA ***, AD**, Zero88 ***, ETC ****
Upgradability: MA ***, ADB **, Zero88 ***, ETC ****
Visual output: MA *, ADB *, Zero88 ***, ETC ****(if extended pc used)
Connections: MA **, ADB **, Zero88 ****, ETC ****

Price: MA 48/6 ~ €5000, ADB Tango 48 ~ €1900, Zero88 Jester 24~ €1700, ETC Smartfade 24/96 ~€1700


all are more or less comparable, and have advantages and disadvantages
But as stated in the previous post: look what's important for you. And find a match for your way of using consoles and your type of use.

[derekleffew]

It should be noted that the consoles in the above post (except SmartFade) are not as popular in the US as consoles from Leviton, Strand, and ETC, but may be more popular in Europe and elsewhere.

[martinty]

Whoa, Ok, let me clairify somethings... I am the only trained professional at the theatre, the rest of the volunteers are people that i have trained... I am looking for a board that uses cue stacks instead of sub mode... I am planning to use some basic DMX fixtures, namely LED bars, there is absolutly no chance we will ever use a moving fixture. My budget is low, I have about 15,000 CAD, to spend, after tax of course. The dimmers take about 10,000 of that... So...I was looking at an ETC Express, the company that i purchase from is still able to get me a brand new console from ETC, at a little bit of a discount.

The consoles that i have used are

Jands Hog 1000
Innovator 24/48
NSI 7524
Strand 300
and then computer control like lightjockey...