|
|
|
|
||||||
| Notices |
| Lighting For any discussions related to lighting |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 10th, 2004, 03:24 PM
|
|||
|
|||
Controlling Work Lights From Board
If my school's stage work lights are contolled from a regular on off switch on the stage, is there a way i could program them as a channel?
|
|
December 10th, 2004, 04:09 PM
|
||||
|
||||
|
what voltage are you using for lighting?
__________________
Philip LaDue Endicott Audio ADR Audio "The loudspeaker has more of an effect on the sound we hear than anything else in the audio reproduction chain"- Alan Frank
|
|
December 10th, 2004, 04:30 PM
|
|||
|
|||
|
What sort of controls are they? If you have dimmers in your racks which are assigned to the worklights, then you can simply patch the DMX channels (usually the dimmer numbers in this sort of setup) to a channel on your control desk.
If this is simply a light switch on the wall (the work lights are fed from your building light power), then you would need to get a large enough relay module in the dimmer rack, and pull wire from the rack to the switch.
|
|
| Tags |
| board, controlling, lights, work |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Young Lighting Tech Looking For Work | Sunshine_beach | General Advice | 30 | July 21st, 2009 03:36 AM |
| New Booth | Foxinabox10 | Get Organized! | 64 | November 11th, 2008 10:35 PM |
| Lighting Designers get their own play | teksalot2 | Lighting | 15 | July 11th, 2007 04:34 PM |
| Making Flats? | Light-er_12 | Scenery | 17 | April 14th, 2004 02:42 AM |
Linear Mode
