Control/Dimming Ion & MAC 250+ ?

SethRoBoDean · November 10th, 2009, 06:04 PM

I'm using an Ion for the first time. So far there are things I like, as well as dislike about it, but that's a discussion for another time. I need to find the "Reset" & "Lamp On" commands for the MAC 250+s that I'm using. On a Hog they're under the shutter control. Any body have any helpful thoughts?

epimetheus · November 10th, 2009, 06:14 PM

Assuming you've selected the appropriate fixture profile in patch, the lamp controls are in the About section. Select you're fixtures then hit the About button, Lamp Controls are on the lower right of the CIA. This is assuming you're running v1.8 of the OS. In v1.7 and before, Lamp Controls is a softkey. For v1.7 and before, hit the More Softkeys button, then S3 I think.

SethRoBoDean · November 10th, 2009, 06:19 PM

Thanks! I'll give that a try.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie ETC Ion question about moving lights	BruceP	Lighting	6	September 10th, 2009 06:06 PM
I'm so happy! I got to play with an Ion!	Sony	Lighting	23	September 3rd, 2009 06:49 AM
Control/Dimming - Ion effect building for a hog user	sparkyinnc	Lighting	4	July 25th, 2009 11:32 AM
Control/Dimming - A Question for ETC Ion Owners	zorlack	Lighting	12	February 11th, 2009 02:08 AM
I have now seen the Eos and Ion...	derekleffew	Lighting	20	March 16th, 2008 12:05 AM