|
|
|
|
||||||
| Notices |
| Lighting For any discussions related to lighting |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 19th, 2007, 11:32 PM
|
|||
|
|||
Colortran ERN 96 Fan problem
I'm looking for a supplier for parts for a Colortran ERN 96. The fan in our unit has burned up and I can not find a replacement. I have replaced the fan with a standard off the self unit, but there is a sensor on the original that will not allow the dimmer to work normally. I have looked online for any info, and wiring diagrams but I have found nothing. Any help anyone could give me would be greatly appreciated!
|
|
April 20th, 2007, 12:30 AM
|
||||
|
||||
|
Re: Colortran ERN 96 Fan problem
Where are you located?
I know a guy that might be able to help you out.
__________________
Philip LaDue Endicott Audio ADR Audio "The loudspeaker has more of an effect on the sound we hear than anything else in the audio reproduction chain"- Alan Frank
|
| The Following User Says Thank You to avkid For This Useful Post: | ||
Chris 757 (April 20th, 2007) | ||
|
April 20th, 2007, 02:39 AM
|
||||
|
||||
|
Re: Colortran ERN 96 Fan problem
Is it a 3 wire 120v brushless fan? There are a ton of suppliers if you can't find the OEM part.Grainger stocks quite a few. You probably want the kind with 3 wires, if its a 12 volt it's + , -, and an RPM lead. this allows the controller to know that the fan is turning, it's might be possible to jumper from the hot lead to the center terminal on the connector, this would fool the controller into thinking the fan is on full, which it should be if it's new. Don't do this, however if you don't understand what I just said or if your not a qualified electrician.
< read that last sentence real fast like those legal disclaimers on Lease commercials.> 
__________________
Van J. McQueen Technical Director Artists Repertory Theatre Some people are like Slinkies... Not really good for anything, But they still bring a smile to your face......... When you push them down a flight of stairs.....
|
| The Following User Says Thank You to Van For This Useful Post: | ||
Chris 757 (April 20th, 2007) | ||
|
April 20th, 2007, 10:34 AM
|
|||
|
|||
|
Re: Colortran ERN 96 Fan problem
That is an instock item for us.
__________________
Thanks, Bill - ESC Entertainment Systems Corporation Innovative production assistance since 1973 Sales - Rentals - Design - Consulting 800-582-2421 - bill@entsyscorp.com
|
| The Following User Says Thank You to BillESC For This Useful Post: | ||
Chris 757 (April 20th, 2007) | ||
|
April 20th, 2007, 05:45 PM
|
|||
|
|||
|
Re: Colortran ERN 96 Fan problem
Thanks for all your help and info!
|
|
| Tags |
| colortran, ern, fan, problem |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lighting tutorials and systems | goldenillusions | Lighting | 41 | May 3rd, 2009 01:56 PM |
| what's the difference? | techybabe | Lighting | 15 | May 17th, 2004 10:50 PM |
Linear Mode
