Dataflash Issues (please help, next show in 2 days)

[muvment]

So i've got a lonely original dataflash sitting here next to my nice new shiney AF1000s. The problem is, I can't get the **** original dataflash to work with any controller around. i've got a *random* DMX512 controller here that seem to work w/ every fixture I throw at it except the original dataflash. The AF1000 controller doesn't seem to like the original dataflash, either. Is this thing even programmable to a normal network? Anybody know anything about this (channels, etc.).

It doesn't do the startup test when I plug it into a board, so its recieving some sort of signal. I can't seem to get past that point in my troubleshooting.

[derekleffew]

As best I can remember, the original Dataflash is NOT capable of listening to DMX, only the Lightwave Research "Dataflash Controller"--NOT the same as an AF1000 controller.

Attached is the user manual dated August, 1989. <File too big for control booth.> Here's a link to it on my site, it's 3.4Mb.
http://www.derekleffew.com/DataFlashdf.pdf

Hope this helps, but I'm afraid it's not the answer you wanted.

[muvment]

Just got off the phone with the HES team (of which, nobody has worked for HES in 10 years). Turns out, nothing can communicate with the old dataflashes. My AF1000 controller would need a different EEPROM which would make it incapable of controlling AF1000s and the old dataflash will work with nothing else.
Anybody want to buy an old dataflash?

[avkid]

Take out the lamp and salvage for parts.
You might get a few pounds of scrap metal out of it to boot.

Strike that, you can buy the rest of the set and a controller.
http://www.theatreworks.com/usedgear.asp