Screw Type

bdesmond · #1 (**permalink**) May 12th, 2004, 12:08 AM

Does anybody know what type of screw the little brass colored ones that you use for screwing down a ferrule & wire into a pin inside a stagepin connector (male) are called? They're about 3/8" long, machine thread.

ship · #2 (**permalink**) May 11th, 2004, 11:26 PM

Philips Pan-Head Brass 8-32x1/4" screw. You can get a similar one from McMaster Carr or Bates/Advanced Devices along with TMB or Lex will sell the replacement screws for a fairly inexpensive price either individually or by package with all three screws plus strain reliefs.

bdesmond · #3 (**permalink**) May 11th, 2004, 11:48 PM

Thanks. Added it to my shopping list.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SO or SJO & what gauge: replacing asbestos	soundlight	Lighting	23	December 5th, 2005 07:37 PM
standard insturment maitnenance	moojoe	General Advice	13	May 11th, 2005 10:31 AM
Installation of a stage pin plug on a cable, plus history	ship	Lighting	15	March 3rd, 2004 01:01 AM