You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Yes, The 602's worked very well with the SP2's. I got several comments on the amazing clarity and the coverage. Those puppy's are loud and clear.
I was fortunate to have some EV 300 18" subs to use for this event and I used my Europower 2500 amp to push them. Do you know anything about those amps? I had a 60hz hum when the amp was on and the thump just was not like it should have been from those subs. Are those amps really as bad as the reviews I have read?
My plan now is to work to get a QSCPXL6200 (18LBS) for the two SP2's then I can use the two 602's for the some subs and power some monitors. I will retire the Europower 2500.
Dave
Glad to help. I'm sure you saw in the XLS602 manual that when in bridged mode you use the + (red) terminals and turn full CCW the channel 2 input. Use only the channel 1 input control when in bridged mode.