Adding show relay to comms sytem

[JonasA]

I realise that more information is needed to fully answer this, but I'm working on a show this week and really need to work out a solution ASAP.

I'm using a Jands Ezicom system (older version - master station is an E-200, beltpacks are the E-100 model), and I'd like to put in a show relay feed. Currently we have show relay set up to run to speakers in the dressing rooms, so it's about how I feed this signal into the Ezicom.

There's no line in/mic in on the master station, so I'm stumped. Anyone have any ideas? I can get the relay feed as balanced/unbalanced/anything thanks to our very helpful sound technician.

(I'll post more information once I'm back in the theatre tomorrow)

[Chris15]

The simple solution...
Swap the E200 out for an E400 that does have a PGM input...

But that not being a readily available option, I guess the easiest option is going to be to attenuate a line level signal down to mic level and stick that into a headset connector's mic lines...