resistor colour codes

[Hughesie]

hey people

can you give me a little bit of infomation in relation to resistor colur codes

in relation to cable lengths

i tried to look it up but failed

[Peter]

Um... I think you may be refering / confusing two different things.

Resistors are labled according to a standard color coding scheme. This is demonstrated here: http://www.dannyg.com/examples/res2/resistor.htm

Seperately, some people lable cable lengths with their own color codeing systems distinguishing different lenghts of cable, having nothing to do with resistance.

I hope this helps abit!

[Hughesie]

yeah maybe my school is just strange i worked it out from the site you included in your post

thanks

[Footer]

LD calculator Light has a cool little tool that helps identify the resister. And as for as cable goes I personaly prefer 1 color for 5' and one color for 10' and add up the bands and you get the length.

[jonhirsh]

So your saying you put a band of colour every 5' so you just add up the bands of colour to tell how long a cable is?


This sounds horribley enefficent, Try some heat shrink with printed length lablels. and use a colour code to determine the type of cable. or use a printed length with a single colour band to determine length such as red for 8' green for 16' blue for 32' white for 56' etc......

JH

[Footer]

Originally Posted by jonhirsh

So your saying you put a band of colour every 5' so you just add up the bands of colour to tell how long a cable is?


This sounds horribley enefficent, Try some heat shrink with printed length lablels. and use a colour code to determine the type of cable. or use a printed length with a single colour band to determine length such as red for 8' green for 16' blue for 32' white for 56' etc......

JH

Nearly every house i have worked in runs that system or something simular. Usually I prefer to hard label any cable over 50' so i dont have more then 5 bands on it, but in the lighting world you rarely have tons of cable over 50' that is not a multi. Also, in the space i am currently working in we have cable ranging from 5' to 50' with nearly every 5' increment in between. Doing a color code of these would be nearly impossible to remember let alone tell hands that show up the day of how the system works. Simply saying if you see 3 red bands its a 30', if you see 3 red bands and a green one its a 35'.
Also, you put the bands at each connector, not every 5' or so.

[jonhirsh]

but if you put numbers that say 5' on the connector end its sooooo much simpler no counting you can tell at a glance.

As to the 50' long cables not being prevelent in the lighting world, i feel that that opinion might be specific to your area but everywhere i work we almost never use multi unless its a tour. The TV show im on now has no twist or edison shorter then 56' and they top out at about 96' (christie lites does 8' increments btw.) so when your talking about supper long cables having a simple way to tell length is key.


JH

[Andy_Leviss]

Well, if you're going to use resistor code, use it for ORDER, not NUMBER. IE, Brown=5', Red=10', Orange="25', Yellow=50', Green=100', etc. Typically you don't code lengths other than this, instead using combinations. So a 75' would be orange and yellow, a 300' would have three green stripes, etc.

Although we use a different color scheme, this is the basic concept we use in our shop, and in most other shops I've worked at/with.

Why not just write a number? Because now from across the stage I can spot a 50' cable and point it out to somebody, or know which pile I need to head to. After a little while working with a particular code, it'll become second nature.

FWIW, the color code that our shop uses, as well as at least one lighting shop that I know, is:

10'=green
15'=blue
25'=purple
50'=orange
100'=yellow

There is a code for 75', but it's fallen out of use in place of purple+orange, so I couldn't even tell ya what it is off the top of my head.

--A