Control/Dimming Odd ION fader wing behavior

xander

Well-Known Member
I ran into something I've never seen before today. Maybe it's perfectly normal and I have just never seen it before because I don't use the Fader Wings, like, at all.

It was an ION with a 1x20 Universal Fader Wing mounted to the top of the Facepanel. When you turned on the console, all of the faders' LEDs lit up RED. When you brought up fader one, channel one would come up. When you brought up fader two, channel two would come up. So on and so forth. Now, there were no submasters recorded in the show file, period, much less inhibitive subs. There was no cue running or anything to inhibited even if there were. The first thing I did was [Fader Control]{Release}Fader20 both buttons to release any content and then all of the faders' LEDs turned off and everything seemed normal. I then went to Fader Configuration in Setup and it had all the faders listed as Unmapped.

Anyone know what was going on?

Thanks,
-Tim
 
One of the Software revisions changed that. I believe it was 1.8, which would explain why it is not in the original manual, only the update supplementaries.
 

Users who are viewing this thread

Back