Recent content by epimetheus

We're using the Williams Sound Hearing Hotspot Server and smartphone app for ALD and SAP (Spanish translation) purposes. We also have a Listen Tech FM system from the install package that we still have in service if needed. The Williams Hearing Hotspot system is nice in that you can have up to...

This is what Rudder Auditorium at Texas A&M had as well. Now the smaller Rudder Theater had a wonderful slide patch...

Rudder Auditorium at Texas A&M University had a Kliegl patch panel very similar to the SAFEPATCH, just without the circuit breakers. It was fed by (60) 10k? dimmers and had 400+ circuits. Each dimmer had 10 holes and all the circuit hots were above with counter-weighted, retracting leads. It...

This is incorrect. It's a 3 phase, 240V delta system where the high leg is 208V to neutral. The high leg can't be more than the phase to phase voltage without some seriously weird transformer configuration.Also, as mentioned above, orange is also commonly used as a phase color for 480V...

Just thought I'd throw this out there. There is POE based lighting...https://unifi-led.ui.com/

Gotcha. There's definitely an art to precast construction. It's things like this where you have to rely on your precast vendor and experienced construction forces for constructibility and it's influence on design.

I'm with venuetech, in post #1, the first picture, it doesn't look like there's a opening in the proscenium wall to access the loading bridge from the spiral staircase. Will they cut this in later? I would have thought it would have been cast into the wall panel.

I've noticed this as well with our Chauvet Maverick Profiles. We don't have the reversed pan and tilt, but we do have the issue with the color wheel and gobo wheel being off by one position. I think there are also inconsistencies with the zoom. Our profiles zoom opposite to other fixtures in...

Jay, I'd love to have this info. I have a possible application in my church's Christmas production next year.Thanks

What are the specs on the mirror ball motor? Is it DMX or dimmer controlled?

And if the low voltage cabling is related to the load supplied by the power conductors, such as 0-10V dimming ballasts, or in our case data to the lights supplied by the power conductors. Although I don't think the "related" requirement is met if there's more than one circuit in the pipe.

(6) CAT6 cables, especially STP, exceeds rated conduit fill for a 1/2" conduit. You likely need 3/4" or 1" for that many CAT6 STP cables.

I hope not. I suspect this a replacement for the aging RFR3 system. I.E. for those that don't want to use their phones or venues with multiple operators that don't want to purchase and install the apps multiple times.

This was my first thought upon reading the thread title as well...Does he need a stint in obedience school, or a shock collar?

I would prefer both. Panel and circuit number for maintenance purposes, LOTO, etc., DMX for operational purposes.