F
FMEng
Latest activityPostingsAbout
-
-
FFMEng replied to the thread Loudspeakers Advice for outdoor speakers.Try the Control 1 speakers knowing they are likely to die under those conditions, but they aren't expensive either. They have low...
-
FFMEng replied to the thread Loudspeakers Advice for outdoor speakers.https://technomad.com/ Technomad makes "off the shelf" weatherproof speakers. The little JBLs would self destruct trying to be loud enough.
-
FFMEng replied to the thread Loudspeakers Advice for outdoor speakers.What kind of sounds are to be amplified? Just speech, battle sounds, music, or what?
-
FUpdate: All's well that ends well. Found the issue.Much texting back and forth, but as @cbrandt noted--it's all about the...
-
FFMEng replied to the thread Wireless Program sound upgrade/replacement?.Dante is great for many things, but it seems like overkill for this. Analog audio on unshielded, twisted pair usually works just fine...
-
FFMEng replied to the thread Wireless Program sound upgrade/replacement?.Do you have spare network cabling into those locations? If so, network cables can easily carry line level, balanced, analog audio to...
-
FFMEng reacted to MNicolai's post in the thread Wireless Program sound upgrade/replacement? with
Like.
First thing I would do is power the system down, disconnect what is probably 70V wiring off the amplifier for paging/back-of-house, turn... -
FFMEng reacted to MNicolai's post in the thread Another attack in a theatre - Keeps happening again. Can we do anything? with Like.
There's only so much you can do to handle a terrorist attack. Theater safety policies, can, at best, give you a framework of what to do...
-
FFMEng replied to the thread Loudspeakers Backing tracks only to monitor?.Everything needs to work as a system, so we need more information. What are the current mixer, main speakers, other components, and what...
-
FFMEng replied to the thread Altman LED Fixtures intermittent failure.I have commented about this before. Most non-consumer electronic devices made these days use switching power supplies. Switching...
-
FFMEng reacted to Malabaristo's post in the thread Altman LED Fixtures intermittent failure with Like.
If the fixture's display is going crazy while the problem is happening, then I doubt it's an RDM or other data problem. Could be a bad...
-
FFMEng replied to the thread Ct-20 15plug cable tester, experiences?.Sure, it tests for shorts. If two conductors are shorted, two lights will be on together.
-
FFMEng replied to the thread 3 Pin to 4 Pin?.It can be done but there's no pinout standard. It's a matter of figuring out how to connect a particular type of mic to that...
-
FFMEng replied to the thread "Other duties as assigned".We had battery powered faucets and toilets in our building, completed in 2009. Touch less fixtures were the university standard for new...
-
FFMEng replied to the thread New Ion xe no DMX on boot.The APC has optional 3-pin DMX, so the unit in question might be standard 5-pin.
-
-
Loading…
-
Loading…
