J
jglodeklights
Latest activityPostingsAbout
-
-
Jjglodeklights replied to the thread Custom Fixture etc ion.Define "couldn't help"? Also, what fixture is this for?
-
Jjglodeklights replied to the thread Custom Fixture etc ion.Generally, yes if you understand how moving light parameters work at a fundamental level. Again, if you run into issues this is...
-
Jjglodeklights replied to the thread Custom Fixture etc ion.ETC Video on Editing Profiles Focused on editing profiles in V3.2, but the process is pretty much the same except use the plus button...
-
JI would say that these Chauvet IP DMX to Normal DMX adapters fall under things that should come automatically with a specific item...
-
Jjglodeklights replied to the thread Simultaneous cues on ETC Ion running EOS.Let me know if I'm getting this correct- you have a single cue list that you've recorded a base scene look, and then you recorded a cyc...
-
Jjglodeklights replied to the thread Control/Dimming ETC Nomad and Element 2 connecting issues.You've got a few issues here it seems.1. EOS Version- This must match for them to connect. ETC has all the necessary software...
-
Jjglodeklights replied to the thread Chauvet IP 3-Pin Adapters?.Chauvet (and other manufacturers who sell these types of fixtures) offers various lengths of IP interconnect cable for power and data as...
-
Jjglodeklights replied to the thread Verify my math on this....You're using an incorrect power draw for the VL2600- the one you listed is the source wattage and not the actual draw that account for...
-
Jjglodeklights replied to the thread Conventional Fixtures Using a Gobo in a Source 4 70 degree.While not part of their Enhanced Definition Lens Tube lineup, technically the 70, 90, and 14 degree lens tubes are inherently enhanced...
-
Jjglodeklights replied to the thread Colortran 24/48 Issues.Gonna ask the dumb questions first: is the Grand Master on the bottom right up at 100 and is the DMX/Data output line plugged into the...
-
Jjglodeklights replied to the thread Is buying used moving light fixtures worth it?.It depends on three factors: 1. the fixture itself and its propensity (or lack thereof) to fail 2. how well the fixtures have been...
-
JPins 4 & 5 are NOT USED for RDM, either.
-
Jjglodeklights replied to the thread how to mount cheap floodlights to a batten?.This is one way if you wanna go hardware store style. Alternatively, they make smaller clamps for fixtures like these that use a 3/8”...
-
Jjglodeklights reacted to avkid's post in the thread how to mount cheap floodlights to a batten? with
Like.
Conduit clamp, bolt and a washer. Probably $10 or so for a pair. Conduit Clamp -
Jjglodeklights replied to the thread gotchas for transporting a Sensor Touring rack on its “back”?.These units aren’t very tippy. With the modules loaded the weight is still biased toward the base. I can’t recall exactly if the weight...
-
-
Loading…
-
Loading…