S
SteveB
Latest activityPostingsAbout
-
-
SSteveB replied to the thread Kliegl 1550 Series Help.It’s been 50 years since I’ve looked at one. The a picture of the top of the lamp cap
-
SSteveB replied to the thread Kliegl 1550 Series Help.Unscrew the lamp cap on the rear top of fixture ?. Used to use the FLK 1000 watt lamp, not sure those are still available. I think the...
-
SPLSN reported that DR Joel Rubin has passed away in late March at age 95.A giant in the business, since the days of the introduction...
-
SSteveB replied to the thread Best practices as house when hosting touring production's lighting network.Obviously, just having the tour desk send upwards of 4 universes of DMX to a port the house provides! with Advanced Input Patch allowing...
-
SSteveB replied to the thread Lighting System Documentation recources?.Some books come to mind,- Steve Shelly, A Practical Guide to Stage Lighting - William Warfel, The Handbook of Stage Lighting Graphics
-
SSteveB replied to the thread Best practices as house when hosting touring production's lighting network.sACN is likely the go-to if getting a network signal, as opposed to trying to have the visiting desk send DMX. The advantage to the DMX...
-
SAs seen onstage at the Teatro Massimo in Palermo, Siciliy. They were setup for an operatic recital, every chair, there were 40 or so...
-
-
STo all my fellow audio specialists, this was a terrific interview with a famous L.A. audio enigjneer, Bill Schnee. Grammy winner and...
-
SSteveB replied to the thread Counterbalance For Lights.It sounds like the pipe was not all the way in to deck and just locked off at the rail, with the rope lock holding it. Then as you...
-
SSteveB replied to the thread Sensor rack saying it's got a tripped breaker, when it doesn't?.Never had that happen on legacy Sensor or CEM 3. We used to just pull a dimmer and replace with a relay. The brains don’t really care...
-
SSteveB replied to the thread Sensor rack saying it's got a tripped breaker, when it doesn't?.Look for the simple thing first. I think there might be fuses on a relay module ?
-
SSteveB replied to the thread Can I get 240V from ETC Sensor rack by combining 2 circuits?.I cannot think of any location in the U.S. or Canada where you do not need an electricians license from the local JHA to do any...
-
SSteveB replied to the thread "Other duties as assigned".Is the faucet heat activated ?
-
SSteveB replied to the thread New Ion xe no DMX on boot.Always hard to guess what’s going on. I assumed the Ion puts out DMX, that goes into the APS, which merges DMX for house and stage...
-
SSteveB replied to the thread New Ion xe no DMX on boot.The Leprecon APC literature didn’t list 5 pin but did list 3 pin. Thus my assumption for the OP is that would be the connector he sees...
-
-
Loading…
-
Loading…
