Search:

Ok I would love to check it out Bill is there a link or where can a guy find it?

why don't you try something like a digital mixer with an iPad or iPhone remote
Mackie has the DL 1608 and will soon be selling an 8 channel version.
you can set "snapshots" and recall as needed

9481I was installing plugs on some new Source4 fixtures and had to trim a bit from the leads. These bits of wire scattered around the table. I started using a magnetic screwdriver to hold the brass...

IMHO you should just recycle them. I had a number of swords like this, built for a community production and later donated to the HS. I recycled them , never have missed them. A weapons locker helps...

the problem is that the heating element cannot keep up with the amount of fog juice being pumped into it at full volume. Once the heater cools it auto shuts the juice pump off, going back to preheat...

Must involve a rigger to safely do this
a falling sign would be knife like and it could simply slice a skull like a melon.

allen-heath

Zed product page
from there you can download the user guide. for whichever model you have

the channel insert would be one way of patching the processor. another way would be to...

I have some donated Altman enclosed par cans that can take ether a par56 or a par64. Don't think they make that model these days.

the suggestion likely refers to any number of lighting fixture accessory that create some sort of moving effect (fire, clouds, rain, water reflection) this could be a gobo rotator, or something like...

I could not tell you what value. but to me your best bet is to outline its history, and the history of Otto. just off the top of my head it looks to be motion picture lighting equipment. i suspect...

read #1. again

I have been working with horizon since 99. I saw that Cognito had a PC dongle version any idea on the price point of that?


oh it helps if i watch da video
1900 to 2800 or there abouts

get a white string about 3' long attach a small weight on on end then light a single CFL in a dark room. spin the string and weight slowly (at a steady rate). You will likely notice that it is not a...

The best fix is to get any wirenuts or sugar cubes out of the fixture. replace the old socket with a new socket with long leads.
9112

like the 700MHZ issues the FCC ties this move to "Public Safety".

You will never regret spending the time and effort of working with consultants. They will need your input as much as you need theirs. The end result is a facility and equipment that will work long...

or some thing like this9017

I'm not sure why they show this with the spout on the bottom. When you pour something from a can or a bucket the spout should be on top so you do not get the "glug...

I have seen a mustard / ketchup pump in near the bulk condiments at walmart
9016

I had this setup in a venue i worked in a few years back. very nice for the legsets. it was a newly renovated space then and had a very good rigging consultant from the Seattle area.

numark MP103USB

to get a default 1 to 1 patch hold the C button and key the board off then on
this would be dimmer 1 assigned to channel 1. this would get you up to 48 dimmers working.
to get dimmers 49 - 72...

no this sling would be just 10 inches eye to eye. very short. something you would make from the GAC and would need to add thimbles, ovals and build time. It is a quick way to get a pick point...

Stage hardware for lifting and suspending scenic elements. Both have a D-ring as the lift point. Both irons should be thru-bolted to item being lifted (minimum of one rated bolt per hanger, in...

7.5x7.5"

an old suitcase may work for you.