Automated Fixtures Autoyoke problems

ethanhk

Member
Hi all,

We have a bunch of City Theatrical Autoyokes on our FOH truss. One of our ML fixtures has its iris in all the way, and cannot be controlled from the board. The iris operates correctly during calibration, but after it is calibrated it goes to its closed position and stays there. We are controlling these lights with an ETC Element.

None of the other Autoyokes have this problem, and we have double checked the addressing, and the problem persists after we turned the fixture off.
Another problem we have with our Autoyokes is that all of our Autoyokes do not accurately move back to former recorded positions (focus palettes) -- they drift significantly when the board is turned off and then back on.

Our fixtures are connected via sACN to the dimmers, then daisy-chained to the individual fixtures, and each fixture is 10 addresses apart from each other to avoid addressing problems.


Thanks,
Ethan and the Tufts Cohen Auditorium LX Staff
 

Users who are viewing this thread

Back