1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Coemar Pro Spot 250 LX Issues

Discussion in 'Lighting and Electrics' started by theatre4jc, Jul 22, 2009.

  1. theatre4jc

    theatre4jc Member

    Messages:
    170
    Likes Received:
    6
    Location:
    Woodstock, GA
    So I have a Coemar Pro Spot 250 LX that is approx 1 year old which is having gobo issues. Cannot figure it out so I'm appealing for help. Replaced the step motors so thats not the issue. Here is the problem. The gobo wheel will not fully spin. When I try to cycle through the gobos it looks more like a shake feature as it tries to rotate or change but will not. If I manually place the gobo wheel on open will will stay that way for a few minutes then will decide not to work again. For the life of me I cannot figure it out. Thought it could be the sensor but don't see why that would keep it from rotating. Anyone have any ideas why this will not rotate or change properly?
  2. adude23

    adude23 Member

    Messages:
    185
    Likes Received:
    4
    Location:
    Uk
    Have you tried looking at the connections from the motor to the PCB?
    theatre4jc and (deleted user) like this.
  3. theatre4jc

    theatre4jc Member

    Messages:
    170
    Likes Received:
    6
    Location:
    Woodstock, GA
    Bingo thanks. Cable had a short at the connection on the motor! Simple fix that I just never thought of. Thanks!

Share This Page