Grand MA 2 ?

[chawalang]

How do I take a snapshot of information that is active in a executer/ cue, then bring up new information while that cue is active and dump all that into a new cue in a new executer?

 

[TimoteusR]

So you want to copy a cue to the programmer, add new stuff and store it in a new executor?

One way is this

Copy cue to programmer
Edit Cue 1 <select which executor you want> (if your cue isn't 1, you should change the number to whatever your cue is)

Add new content, for example fixture 15 @ 50%
Fix 15 @ 50 Please

Store in executor
Store <select which executor to store to>

If you want to do it so lighting doesn't change on stage, you should use blind.

There must be a better way to do this. Chamsys has a way to press inc and select a cue and it will add it to the programmer. I suggested this feature to MA a while back but don't know if they have done it.

 

[TheLightmaster]

Select the fixtures. "Thru Thru Please" is one of the fastest way. Then do "At (whatever cue you want to capture) Please"
make your modifications and then store.

 

[JonathanHarpur]

If what you're seeing is live, and you want it all, "If At Please Please Please Store [target]" will likely get you there.