I have a Strand Light Palette and two ETC Revolutions (no additional modules) that I have been trying to use. I can set the Revolutions to a DMX channel, and control them with that channel and the subsequent channels, but I cant use the Moving Light patch feature on the board, which means no encoders or additional helpful shortcuts. I have tried the method detailed in the (poorly spell-checked and confusing) manual to no avail, and have messed around with a couple other things, but nothing so far has worked. Advice would be appreciated. If it's of any use to know, the board has a problem with the sub-masters, being that I nor my teacher can get them to work. I have done a hardware check, and every button on the console if functional. It might be a problem with confusing instructions in the manual, an actual problem, or PEBCAC. However, I a friend of mine has said that she has seen this problem with another Strand board before.