Hi all, I do most of my productions here at the school in our black box theater but it would be great if I could turn the auditorium into a usable space. Pictures below of everything I am describing. I did some investigation in there yesterday to figure out what exactly is in the space. There are two large dimmer boxes that say Strand Environ 2 on them. which seem two be permanently wired to three rows of strip lights. The one thing I really can not figure out is how to control them. There is a 4 pin connection on the other side of the stage that says "lighting system" over it but when I plug it into the Strand Controller Board that also lives in the auditorium it seems to have no affect on the lighting. I want to figure out how to control the strip lights that are there. Ideally I would love to get the system rewired (if the system looks like it can handle it) into three electrics that I can hang fixtures on rather than the permanently wired strip lights. Let me know what people think. I can't figure out how to control this thing or even if it is a dmx control. Any help would be appreciated.