These Ads will no longer appear once you have logged into ControlBooth.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Using Sperry DM-210A Tester

Discussion in 'Lighting and Electrics' started by Tweedle, Aug 7, 2007.

  1. Tweedle

    Tweedle New Member

    Messages:
    12
    Likes Received:
    0
    Location:
    Vero Beach, FL
    Hey all,
    I just updated my electrics toolbag with some new toys. One of which is the Sperry DM-210A Digital Multimeter:
    [​IMG]
    I have used multi-meters before, but maybe I need more coffee.
    I am trying to test resistence through... anything.
    I have read over the manual (in english and french) and it only says "connect the leads to their respective jacks."
    Any help would be nice.
  2. Footer

    Footer Senior Team Senior Team Premium Member

    Messages:
    8,334
    Likes Received:
    1,197
    Location:
    Saratoga Springs, NY
    From the looks of it, and seeing that I can see the picture... the left hole (with the omega sign) is where you will want to connect your red lead to to check resistance. The other hole with the V for voltage should check your voltages. Short of a simpson meter, very few multi-meter manuals actually show you anything besides the simple operations.

Share This Page