I like to record shows that I do so that I can go back and critique my mixing. I normally connect my recording equipment to a matrix that has the main feed on my console. My problem is the show I'm currently doing relies heavily use of an effects processor that is after my board and my recordings therefore don't include that. Essentially here is my setup: Mixer==>EQ==>Compressor==>Effects==>Another EQ==>Amp==>Speakers Both of my EQ's have XLR & TRS inputs/outputs and I'm only using the XLR outputs. Would it work if I connected my recording device to the TRS outputs of the second EQ while still used the XLR outputs to feed the amp?