fixture suggestion ??

[len]

I'm looking for several small pattern projectors. Beam distance is only about 8' and the beam field is only 24" wide (the surface of a bar). Problem is the only place to mount them is on top of a wooden ledge which is only 6" deep. I can screw them onto the ledge, but they won't be permanent.

I was considering the Altman Micro Ellipse, but even that might be too big, although I can't find specs on their website.

No hurry as this isn't going in until February.

Suggestions?

 

[SteveB]

I'm looking for several small pattern projectors. Beam distance is only about 8' and the beam field is only 24" wide (the surface of a bar). Problem is the only place to mount them is on top of a wooden ledge which is only 6" deep. I can screw them onto the ledge, but they won't be permanent.

I was considering the Altman Micro Ellipse, but even that might be too big, although I can't find specs on their website.

No hurry as this isn't going in until February.

Suggestions?

Micro Ellipse is under their Architectural section, Micro Fixture series.

Altman Lighting, Co., Inc.

SB

 

[Sony]

I found the PDF Specs on the Micro Ellipse on the first page of google after typing in Altman Micro Ellipse...next time try a search, it would probably save you a lot of time.

http://www.stage-n-studio.com/Cat_04_PDF_pages/Cat04-MicroEllipse.pdf

The Yoke Depth is only 2.5"...it's plenty small enough.

 

[len]

But the size and weight (although that's a lesser consideration) are not listed anywhere. I know a place that sells them, so I'll ask there.

Any OTHER suggestions for a gobo projector of similar size?

 

[BillESC]

Len,

Since you have time, you may want to check out Irradiant's LED gobo projector. It is due to arrive in the states next month and uses a 5w SSDL. It will also sell for under $ 100.00

 

[gafftaper]

What about Goboman's little mini projector. It's small and cheap check it out here.

 

[len]

Given the quality of their stock gobos, I am loathe to use a goboman anything. But it might be worth it to have on in inventory so I can have it to show customers to against a 575w leko. Also, the goboman is still a little big. I'm wondering if the ADJ Roto thing would work. Closer to the size requirement I need.

Bill, might just order one of these, one of those, etc., and figure out which is best, since I have the time. Unfortunately, the cabbage ain't there for me either.

BTW, does the Irradiant have user replaceable gobos? That would be a deal breaker for me.

 

[ship]

A few architectural track lighting type vendors you might look into for that distance and beam spread.