Who else has one of these?

[icewolf08]

Look what we dug out of the ceiling:

SN#: 440-115

It seems as though someone stole the brains out of mine, I have never actually dug it out to try it until now. They are going to use it as a pro for "Noises Off!" We may install an LCD and a little computer and make it run arcade games or something. Unless someone has the brains!

 

[Grog12]

Wait what....you dug a Serial number out? I'm confused. Silly Error on page.

 

[Van]

What is it ? No pic.

 

[icewolf08]

Updated the photo links, can you see now?

 

[derekleffew]

Now for the hard question: Is that a Designer's Remote Console for the Light Palette Two® (1985) or Light Palette 3® (1987)?

 

[Grog12]

HA!

I did, or rather the Nevada Conservatory Theatre does...or did. Hangin out in the cats.

 

[Van]

Is that your workbench Alex? Are those your bottles on the shelf?

 

[icewolf08]

Is that your workbench Alex? Are those your bottles on the shelf?

I respectfully decline to answer that one....

 

[Grog12]

****...apparently I need to apply for a job with Alex!

 

[Van]

****...apparently I need to apply for a job with Alex!

Ha! I've got a 12 year old bottle of Taliskers on my bookcase in my office.


I love that Light Pallete. I need to go take pics of the old Board we have in storage, with the serial #oo-EXP-002 That's exp for expiremntal.

 

[Footer]

I do!

Not exactly the same, but close.

I have yet to get it powered up, but I am pretty sure it will. Its in a closet right now, need to move it to my office. I also still have the original dust cover!

 

[icewolf08]

I have yet to get it powered up, but I am pretty sure it will. Its in a closet right now, need to move it to my office. I also still have the original dust cover!

I have the original dust cover too! However, I know mine doesn't work. It really looks like it is missing it's brains:

I feel like something should be connected to the two blue connectors...

Here is the serial number:

 

[derekleffew]

By the 1989 date, Designer's Remote for Light Palette 3, then. Alex, I hope your 520 and 550 look as good in twenty years.

 

[Sony]

I have the original dust cover too! However, I know mine doesn't work. It really looks like it is missing it's brains:

I feel like something should be connected to the two blue connectors...

Here is the serial number:

Not nessicarily! It could very well be they are just expansion connectors! That could be why they are blue while the rest of them are white. I say try and power it up, the worst that can happen is it doesn't turn on.

 

[Van]

If it is the Designers console, then it really wouldn't have any "guts", as it would really only be a remote take-control device. You might have a fully functional unit there. Well.... Fully functional as soon as you find the Light Palette to go with it.....

 

[icewolf08]

Well, I tried to turn it on, it doesn't do much of anything. There is a switch on the back that seems to be connected to the lumiline lamp on the front of the console. Other than that there aren't any other power switches. I find this odd. There are two N connectors on the back labeled for video. There is one male 4-pin XLR jack on the back as well. I did have to replace a fuse in it, but that didn't make it go. Thoughts?

 

[mbandgeek]

We have 2 consoles that look like that at school and i will take a closer look whenever i get back into the light lab.

 

[waynehoskins]

Not the same, but I've got an MLP. Pretty thing. Even seems to work. (!)

 

[derekleffew]

icewolf08, I suggest you contact the manufacturer on their 24/7/365 toll-free emergency number. Oh, wait...

Nevermind.
http://www.controlbooth.com/forums/members/icewolf08.html