one quick questions some of you may be able to answer. if I ordered 2 of these eartec wireless packages (24G 4 Man CT) would all 8 of the headsets work together?
wireless headsets
- Thread starterw3st0n21
- Start date
spiwak2005
Active Member
Yes I'm intrigued as well. I like the idea of some of their other products - to tie wireless into a venue's existing wired system. I fear someone is probably going to tell us that these products are just junk though. Otherwise, it looks promising for a low cost solution.
Re: the OP's questions - I'm guessing as listed, two packages would NOT allow you to use all 8 on the same channel. But it sounds like if you asked, they would customize it so it will. That's just a guess/hunch; no indications of what frequencies they work on.
Re: the OP's questions - I'm guessing as listed, two packages would NOT allow you to use all 8 on the same channel. But it sounds like if you asked, they would customize it so it will. That's just a guess/hunch; no indications of what frequencies they work on.
hmmmm....i would seriously consider buying these if someone said they are decent...at the moment we are using 2 way walkie talkies and headsets, so when someone says something you hear "ahdfqrh;ljenakjlhjfddnskjhkfj;iflahsjn". so when my spot ops say something i just walk out the door and ask them what they asked. the garble on headset is my indicator that they need me.
lighthouse
Member
what if you bought all master stations???
lighthouse
Member
Eww...... the new cordless phone area.
lighthouse
Member
New? What's so new about a 2.4ghz cordless phone? And don't forget some wireless networking uses that spectrum too!
The old ones were around 900Mhz.
I would like to know how well they resist interference.
Let's not forget the microwave ovens in there and Bluetooth too...
802.11b, g and n all operate in 2.4 gig (N also runs in the 5Ghz end of town too). That is most deployed WiFi today...
At least here in Aus, more and more cordless phones are going to 5.8 gig to avoid the spectral dirtiness of 2.4 gig.
And 2.4 gig has a wavelength of just 120 mm and so small movements can be the difference between no reception and reception depending on how it feels...
Basically it's free for all spectrum and reliance on same should be treated accordingly...
802.11b, g and n all operate in 2.4 gig (N also runs in the 5Ghz end of town too). That is most deployed WiFi today...
At least here in Aus, more and more cordless phones are going to 5.8 gig to avoid the spectral dirtiness of 2.4 gig.
And 2.4 gig has a wavelength of just 120 mm and so small movements can be the difference between no reception and reception depending on how it feels...
Basically it's free for all spectrum and reliance on same should be treated accordingly...
epimetheus
Well-Known Member
Anybody ever ran across this before?
BluComm Contact Page
The church I go to doesn't want to invest in wireless ClearCom, so right now the FOH engineer has to wear a set of IEM's and a wireless lapel. I'm wondering if I can make an adapter to convert the connectors of the above linked dongle to 4-pin XLR.
Thoughts?
BluComm Contact Page
The church I go to doesn't want to invest in wireless ClearCom, so right now the FOH engineer has to wear a set of IEM's and a wireless lapel. I'm wondering if I can make an adapter to convert the connectors of the above linked dongle to 4-pin XLR.
Thoughts?
Similar threads
