Conventional Fixtures Gobo Holder for Strand 2321 and 2211

[mein5318]

I'm trying to order a Gobo's (B-size?) for either Strand Century model 2321 or 2211 it appears that there is a slot but no one is able to help me identify for certain what size and demensions the Gobo holder is and where I can get one?

Any help will be most appreciated?!?

 

[waynehoskins]

If memory serves me right, those are the old grey radial beasts, right? The old 6x9s we had at college didn't have a pattern slot, not that I recall. If it does have a pattern slot (got any pictures?), a regular B-sized holder should fit, I think.

 

[derekleffew]

This thread will likely be of assistance: http://www.controlbooth.com/forums/lighting/10646-gobo-holder-s-c-lekos.html.

The standard Altman holder for 360/360Q fits also.

http://www.bhphotovideo.com/c/product/196000-REG/Altman_360_PH__Gobo_Pattern_Holder_for.html

 

[church]

the gobo holder is the same as the Strand Lekolite - indeed a number of the parts are interchangeable including lens tubes, yokes, shutters and the complete shutter assembly. I have gobo holders at home which I made from aluminium sheet. I can post the dimensions if someone does not post the name of a supplier. I use B size gobos in these fixtures

 

[mein5318]

Its a black body... and the info i've obtained lists a gobo holder as a feature

 

[mein5318]

Will a Holder for an Altman Shakespeare work?

 

[derekleffew]

Its a black body... and the info i've obtained lists a gobo holder as a feature

This unit? theatre.uwinnipeg.ca/download/lx/6x9bu.pdf Guaranteed it came from the factory in glorious battleship gray baked enamel. The dipstick is listed as part #1342.

Will a Holder for an Altman Shakespeare work?

As a matter of fact, yes, as the graphic below from City Theatrical shows (#2130 vs. #2140). There'll be a little play from side to side, as the SH is narrower by 3/16".

Welcome to Adobe GoLive 4

 

[church]

I never had much success with this fixture using gobos. I had five in battleship grey and 1 in black. I replaced the stepped lenses in the grey units with non stepped lenses which improved them as a fixture but they still did not do much with gobos. I scrapped them earlier this year and I use the lens barrels as alternates for my Lekolites which will project a gobo.

 

[Kelite]

The standard Altman holder for 360/360Q fits also.

Altman | "Gobo" Pattern Holder for 360, 360Q, | 360-PH

I have several of these pattern holders in my 'Misc Pattern Holder Treasure Chest', just in case you can't locate some in your neighborhood...