Is there any way to use the ETCIon Client with an ENTTECDMX USB PRO? If not do you guys have any suggestions for software that will work with it? Preferably that runs on Mac but Windows is also a possible.
You can actually run 14 (its close to that, might be 18) universes without buying Chamsys branded hardware. If you have Artnet or Shownet nodes you can get access to more universes. They do limit you to one 3rd party USB interface.
You can actually run 14 (its close to that, might be 18) universes without buying Chamsys branded hardware. If you have Artnet or Shownet nodes you can get access to more universes. They do limit you to one 3rd party USB interface.
It's possible to circumvent this limitation by using an application to turn an Enttec Pro or compatible device into an ArtNetnode. Ugly but functional. Hold tight, I'm not far off releasing a low cost 4 universeArtNet & E1.31 box.
Do a search for Champsys here on CB. You'll find MANY articles discussing it. It's a pretty powerful piece of free software. Of course once you have it you'll decide you really need a wing panel... which is how they get a $1000 out of you.
Do a search for Champsys here on CB. You'll find MANY articles discussing it. It's a pretty powerful piece of free software. Of course once you have it you'll decide you really need a wing panel... which is how they get a $1000 out of you.