jcslighting
Member
I am running a show tomorrow in a new event space that has a 16'x16' showLED curtain. The controller is currently set for stand alone mode and is just white when plugged in. The owners want to control it and use the colors with the house lighting console - an ETC Element. Tonight we ran a brand new 5 pin dmx cable, plugged into the controller, used a 3 pin adapter and plugged into the optosplitter and nothing. I addressed the console to address 300 on universe 1 and used the profile/personality in the console so I don't think the issue is there but at the controller. The "manual" from the conBox is a multi-fold mess. The controller only has an Up and a Down arrow key - nothing else. The manual has no real text only pictures. Maybe I'm over-complicating this? I am unsure if the DMX feed is actually working - I will try tomorrow to plug in a moving light and make sure I have DMX but I have no idea why it isn't working.
Any ideas?
As always, thanks in advance for your help and suggestions.
Any ideas?
As always, thanks in advance for your help and suggestions.