Brenden Friedel
Active Member
So at my school, we have 2 Crown TI-6000. These are powered using a Dante switch. Recently anytime we turn on the system using a Crestron system it sometimes doesn't turn on the amps or it only turns on one amp. This means only one array can be powered and since we have to that's not good. Anyone know a fix for this? I've tried restarting the amp. Note the power of the amp is on but the screen doesn't light up or the switch isn't green as usual. (How the system is run) Cat 5 or 6 runs from the booth where the System processor is. Then runs into a switch which then runs into the power supply [each supply has its own cat 5] These then switch on the switched outlets powering the amps and stages boxes. the audio outputs from the soundboard are also cat 5 out and plug into the stageboxes which hold the outputs for the speakers.