ETC Express no submaster fader action

Cineruss

Active Member
Hi everyone. I once posted on here about adding led fixtures to an etc express 120 board. Thanks for the help and all went well patching. But after patching and assigning channels, I can raise levels by accessing the channel and changing intensity, but when assigning to a submaster, the is no light and the channel levels do not appear to raise on the screen although the bunp button is lit as if it was assigned.Not sure what the problem is, it seems like i am missing something simple but not sure. Any ideas?
 
When you “assign” to a sub, you are recording a look generated from live channels with levels and pressing “Record, Sub, XX, Enter” ?
 
When you “assign” to a sub, you are recording a look generated from live channels with levels and pressing “Record, Sub, XX, Enter” ?
Yes..i set intensity levels for channel, i see the results on the stage, the press record then the bump button assoiciated with the sub i want to assign. Then clear the channel intensity and then raise the fader but no response and the insee no association on the screen with the fader intensity as it is raised.. the bump buttons show it is all assigned
 

Users who are viewing this thread

Back