theatricalmatt
Latest activityPostingsAbout
-
-
theatricalmatt replied to the thread LED Cycs.ETC makes an app for calculating the number of cyc lights you need given their height, dimensions of the drop, and throw distance (how... -
theatricalmatt replied to the thread Ion won't patch to some channels..I would check to see that you haven't exceeded the maximum channel in your setup or your maximum parameter count, and that you're not...
-
theatricalmatt replied to the thread Martin Sues ETC for Patent Infringement.I'm kind of surprised the handles were patentable to begin with. I'm sure outside the field of moving lights there would be plenty of...
-
theatricalmatt replied to the thread Conventional Fixtures Micro Ghost Lights.Sounds like a job for a 3d printer!
-
theatricalmatt replied to the thread Color matching between Colorsource and lustr.No - the emitters are different, and the arrays of emitters are different on top of that.I generally find the best result is to...
-
theatricalmatt reacted to TimMc's post in the thread Can I get 240V from ETC Sensor rack by combining 2 circuits? with
Like.
I"ll be the contrarian (Orthodox)..Go ahead, and stand REALLLY REALLLLY CLOSE to the rack when you energize this whole widowmaker... -
theatricalmatt reacted to STEVETERRY's post in the thread Can I get 240V from ETC Sensor rack by combining 2 circuits? with Like.
No, you cannot do this, as the single-pole circuit breakers are not common-trip, since they are physically separated in different...
-
theatricalmatt reacted to DuckJordan's post in the thread Can I get 240V from ETC Sensor rack by combining 2 circuits? with Like.
yeah this is just a hard no, just like a male to male Edison plug is a terrible idea. This is just dangerous.
-
theatricalmatt reacted to danTt's post in the thread Can I get 240V from ETC Sensor rack by combining 2 circuits? with Like.
Ignoring for a second all of the code violations such a thing would cause.No, a single CC 20 will not provide 240v by combining both...
-
theatricalmatt replied to the thread Grounded receptacle mounting - pin up or down?.What conflict? There's no conflict!A diagonal cut is mathematically proven to have a longer length than a simple, straightforward...
-
-
Loading…
-
Loading…