R
Robert F Jarvis
Well-Known Member 80 From Sebring, FL, USA
- Joined
Latest activityPostingsAbout
-
-
RRobert F Jarvis replied to the thread EOS Go Button.Probably a bit more tactile responsive than the space bar on an attached keyboard.
-
RRobert F Jarvis replied to the thread LED Cycs.Not quite sure of "as many as many feet of them as you have cyc". Our cyc is 30 x 20 foot. I guess the parameter should be - how far...
-
RRobert F Jarvis replied to the thread LED Cycs.These are a lot more expensive then the CSCYC but I agree the later as my best guess would require at least 8 units four up top and four...
-
RRobert F Jarvis replied to the thread LED Cycs.About 4 feet. Using both floor and pipe mounted units. No backlighting or bounce.
-
RCurrently want to replace our very old three bay, 1000 watt cyc lights with modern LED cycs. I'm looking at ETC CSCYCs and wondering if...
-
RWe have a ETC "Expression III" sitting in the light pit. It works fine but the standby power power caps are dud so you can program and...
-
RRobert F Jarvis replied to the thread Controlling Addrressable LED Strip with DMX.OK I got that. I'm starting using the Arduino SPI drivers and code examples for the WS2815 and WS2812B. I'll program 5volt tape to start...
-
RRobert F Jarvis replied to the thread Controlling Addrressable LED Strip with DMX.I'm very familar with EOS and will look up that ESPixelstick - it llks interesting. To reduce the usual pixel map load I'm heading...
-
RRobert F Jarvis posted the thread Controlling Addrressable LED Strip with DMX in Lighting and Electrics.We would like to use addressable LED strip. But light it in a way to carry a strobe along it for a short length and cut down on...
-
-
Loading…
-
Loading…