-
-
MMalabaristo replied to the thread LED Cycs.I have S4LED Series 1 fixtures with cyc adapters and I have to tilt them down for clearance every time we set our orchestra shell, so I...
-
MAnd pipe is not really measured by inside diameter either (1.5 sch 40 is 1.610" internal and 1.9" external), but some nominal or legacy...
-
MAs Kyle said above, cast floor flanges, are not meant to be used in rigging, and while cheeseburgers are not "ANSI Approved for Overhead...
-
MMalabaristo replied to the thread Wrong size pipe problems.And not only that, but any use in a pipe grid is going to be pretty darn similar to the type of scaffolding applications they were...
-
MMalabaristo replied to the thread Quality of audio "Sinfonia"/"OrchExtra"/"InstrumentalEase".I hadn't heard of it before, so I was doing some reading on MTI's website and found this FAQ that includes a note about a free trial...
-
MMalabaristo replied to the thread Telex 2 channel Wired and Wireless setup suggestions.I believe the wired com connections on the BTR800 are configurable for either ClearCom or RTS, so what you have now makes sense if I...
-
MMalabaristo replied to the thread Painting new masonite (hardboard) overlay.I would guess price... but Plyron isn't exactly cheap either.Contractors at one of my schools did just use MDO to patch a section of...
-
MMalabaristo reacted to MNicolai's post in the thread Speakers have rotated to wrong angle with
Like.
Speakers look like Innovox but could be something else. Probably weren't torqued down adequately the first time and vibrated loose... -
MI think the OP is looking at the upper column loudspeakers, particularly House Right. Looking at the House Left main PA, it appears to...
-
MMalabaristo replied to the thread Speakers have rotated to wrong angle.Pictures of everything would help a lot in being able to provide suggestions. My immediate response is that if you think their position...
-
MMalabaristo replied to the thread Etcnet2 Node Dropping edmx.You are indeed remembering correctly that NET2 doesn't play nicely with IGMP. I don't know if there's a way to make it work, but the...
-
MI loved that time it was in Milwaukee. :pray:
-
MMalabaristo replied to the thread Best practices as house when hosting touring production's lighting network.I don't necessarily disagree with this, but there's a very big difference between "Can I troubleshoot this?" and "Do I have time to...
-
MMalabaristo replied to the thread 6pin XLR for Comm (Clearcom).The Clearcom branded cable for this is pretty expensive, but also very nice and has the right connectors... What makes it nice is mostly...
-
MMalabaristo replied to the thread Altman LED Fixtures intermittent failure.If the fixture's display is going crazy while the problem is happening, then I doubt it's an RDM or other data problem. Could be a bad...
-
-
Loading…
-
Loading…