Recent content by adaguy

Okay perfect then they said they will put the breaker modules in. So on the back I'd use phase 1 and 3 in correct? Then ground and neutral obviously.

Okay so Christie after hassling finally got back to me and said they could offer "24x2.4K Sensor Dimmer Pack" set to single phase. Will this work to spread the power across the 2 phases as at 120v we have almost 180A and its a 100A breaker but 2 phases.Thanks for your help everyone i'm used to...

Yes i get that what i was asking is if the distros i looked at on Christie Lites was gonna work for the 208v lights but from what you're saying it seems like it would be easier to use only 120v lights spread across two of the 3 phases by turning off the breakers for the 3rd phase on a 120v distro.

Christie said they won't do that but are gonna try to find another local company that will. Lighting load isn't all that crazy 6 750 source fours, 4 martin 700 profiles, 9 quantum wash. The moving lights can do 120 just need Christie to re fuse them for rental. The disconnect is 100 amp so from...

Okay that's great to know about the split and delta being so uncommon, and yea that's why I was thrown off when it only had 2 hots a neutral and a ground.now in terms of renting that. Would I just go with an ordinary 3 phase system and avoid the channels on that phase, given that, wouldn't a...

So a venue I'm going to be running a tour through has confused me quite a bit. Correct me where I'm wrong but, typical 3 phase power has 208 volts hot to hot (except the high leg) and single phase would have 240v. so when looking at the disconnect in the venue I assumed it was single phase based...