Recent content by appsys

  1. A

    Economical Dante/AVB mixing board

    If you have a digital mixer which features metering of the inputs, you can use this for FOH presence indication and also clip control (if the analog signal is clipping on the preamp, you can see this also in the digital signal - it's on the upper end of the scale).Regarding the Cat5 vs. Cat6...
  2. A

    Economical Dante/AVB mixing board

    Dante/AVB is expensive, even if you manage to get mixers with that connectivity for a reasonable price. The point is that you need also a stage box which such connectivity, and that is where you have to spend the $$$$ on....A more economic alternative is to use a digital mixer with ADAT...
  3. A

    Some more LS9 questions

    I don't know the LS9 in "Hardware", but from reading the manual I doubt it's possible. To be on the safe side, I would go either with a Behringer BCR2000 where a template is available and I can confirm that all store/recall things are working, or with a PC software solution (standalone or VST...
  4. A

    Some more LS9 questions

    No, an ADAT level meter (I use the one from my RME HDSP 9632 soundcard) shows the level after A/D conversion, but it does exactly what the LED indicators of the ADA8000 (which live in the analog domain) say. Minimal signal (just enough that the green "Signal" LED on the ADA8000 goes on)...
  5. A

    Some more LS9 questions

    You see both "signal presence" and "clipping indication" on any ADAT signal level meter - even better than on ADA8000's LEDs (that's how most of my customers do it).Regards, Rolf