Recent content by avkid6345

  1. avkid6345

    Projector Connection for Auditorium Users- is there a better way?

    Does the balun have one Cat5 or two? We didn't have much luck with the ones with 2 cables. We would have dropouts and random connection issues. We switched over to HDbaseT extenders and that solved all of our issues.
  2. avkid6345

    Booth Pictures :)

    Here's a look into our booth. We have it configured completely different depending on what the show calls for. FOH balance is way off in there, so we sometimes build a booth outside for sound.We built our booth out to FOH for this show.We tour with certain shows so I visit this booth about...
  3. avkid6345

    Splicing Gel

    Re: Fusing gelsI'm kind of confused on what you want. You can't exactly "fuse" gels together. If you tried melting them, the color saturation and thickness would be uneven, producing less than desirable results.I'd cut both sheets to fit the 7" frame. You can then cut both sheets (in half...
  4. avkid6345

    Jumping Intensity in ParCans...

    From what it sounds like, Your lights either don't dim from 0-60% until they hit that point, switch on and dim the remaining 60-100% or do they dim from 0-60% and then jump to Full from 60%? Another test you can do... Assuming channels and dimmers are patched the same. Press [DIM] key, then type...
  5. avkid6345

    Jumping Intensity in ParCans...

    On many consoles including the Express, you have the ability to assign different dimming curves to lights. For example:The typical (Default) curve on the express is a 1:1 ratio. If your channel is at 0%, then the dimmer will be at 0%. 00 05 10 15 20 25 30 35 40 45 50 55...
Back