Recent content by Brentgi

  1. Brentgi

    WTB - BSS BLU-DAN BLU Link/Dante Bridge

    I'll let you know if and when I hear from them. Thanks for the info!
  2. Brentgi

    WTB - BSS BLU-DAN BLU Link/Dante Bridge

    I'm still waiting to get a response. Supposedly someone is supposed to contact me today.Can you elaborate on this?
  3. Brentgi

    WTB - BSS BLU-DAN BLU Link/Dante Bridge

    Looking for a BSS BLU-DAN BLU Link/Dante Bridge.I have a project that's been on hold for several months due to a shortage at Harman. Please message me if you have one for sale. Thanks!
  4. Brentgi

    MA sequencer not sequencing

    I have a Middle Atlantic USC-6 that is no longer sequencing. The indicators on the front panel are sequencing, but it is not switching any of the modules (RLM-20's). They are set to auto but will not power-on when sequenced. For now, we've got to keep each module in the always on state.Any...
  5. Brentgi

    DMX connections

    The topology would have to change. No more daisy-chain, and we'd have to run a cat cable to every unit. Idk which is more cost effective, running power or running cat cable.
  6. Brentgi

    DMX connections

    The '/s' was meant to denote the sarcastic tone in my comment. I was just surprised that no one had brought this up already. :lol:
  7. Brentgi

    DMX connections

    Is 3-pin DMX even a thing? /s
  8. Brentgi

    Eos & ASCII Serial Strings

    I meant to follow up on this last week but forgot...Anyway, scouts honor, I originally tried it without the '$' and it didn't work. But i tried it again, as you suggested and it worked just fine.Either way, I appreciate your input.Thanks again!
  9. Brentgi

    Eos & ASCII Serial Strings

    I need help figuring out what I am missing. I have sent Eos Element the following string: $ Macro 298 # and $ Macro 299 #Here is the result:It doesn't fire either of these macros. I've tried it with an without the '$', I've tried changing the '#' to '\r' and cannot get it to fire the...
  10. Brentgi

    Dante AVIO

    So they wont show in Dante Controller if you don't register them?
  11. Brentgi

    Outboard Gear London Architect to Audio Architect

    Mystery solved. Should've called support in the first place. Evidently, I can't run London Architect when Audio Architect is running. There is a firmware update option in Audio Architect that will do the trick, but again, I can't have both programs running at the same time or Audio Architect...
  12. Brentgi

    Outboard Gear London Architect to Audio Architect

    Thanks! I will give them a call. And as I understand it, I have to program the DSP from scratch going from one platform to the other. So I have backups of backups just in case.
  13. Brentgi

    Outboard Gear London Architect to Audio Architect

    We're currently running a BSS BLU-100 with a BLU-BOB2 and will s0on be adding an additional BLU-BOB2 as well as a BLU-DAN.The current setup was created several years ago using London Architect. I'd like to migrate over to Audio Architect (for use of zone controllers and iPhone/iPad Motion...
  14. Brentgi

    Loudspeakers How to use a passive split so amps get the same input?

    Thanks everyone for the comments! I think I have the info that I need. I'll let you all know how everything works out.
  15. Brentgi

    Loudspeakers How to use a passive split so amps get the same input?

    The amps (Crown CDi 4000's) are racked together, but they do not have a "pass thru" feature, at least not from what I can tell.1; Mono 2; QSC E118SW 3; There is nothing between the outputs of the BSS London BLU-100/BLU-BOB and the inputs of the amps other than the wires themselves. 4; Input...
Back