We have a linear intensity effect that is attempting to be run on some ColorSource PARs. The channels are set to a level in the cue and the effect is on the selected channels. However in one of the cues, as we hit go the channels only show the level and not the effect. When we go back to look at...
The problem was indeed the power supply not being powerful enough, the small one at 40w. Thankfully we didn't fry it. Running the ColorRam off the scroller brain was the easy solve.
We have an IQ power supply that usually runs an IQ and DMX Iris without problems. We are currently trying to add a ColorRam II scroller into the mix. We have all the parts appropriately attached to the unit and the dmx chain is; IQ power supply into IQ into scroller into Iris. The IQ and Iris...
We had to redo the color palette because we are using a different profile for the units, which was the cause of the units not responding to the color palettes correctly I assume.
I'm using color palettes that I made previously on the Ion with different channel numbers but the same unit types. I I put in the new channels for the by types, but when I go to use them an error message comes up that says "Channel List Empty". What steps do I need to take to fix this? Do I need...
I am working on an ETC Element, and there are channels displaying like subs on a screen controlled by an RVI and we would love for them to go away. Thoughts? I have attached a photo if my description is unclear, I am talking about the channel squares at the bottom of the screen.
As we took the copy of another show file, the system settings were not copied. So the offset was set to the default of 20000. After merging the patch and system settings from the other show file, all is well.I am curious how the console was able to turn on the B sides for everything else...
I have a rig that has been up and running for a few months, shows are open and all was well. We are adding another show to the rep, and that means adding some specials. The units are circuited, through dimmer doublers, to a mult, and plugged into dimmer racks, in dimmers that were used for...