cbrandt's latest activity
-
Ccbrandt replied to the thread USITT Show Report.It seems a lot of faculty position compensation is based on the assumption that the faculty also works outside the university at least...
-
CI can't answer from the USITT standpoint, but of the advertising I've seen for TDs, most have lots of responsibilities listed...
-
Ccbrandt replied to the thread Wrong size pipe problems.Are the tops getting attached or tied off at all?
-
Ccbrandt replied to the thread Martin Lighting MAC 2000 Profile II.Agreeing with this one. From experience, even a partially loaded capacitor of that size will HURT at best, and the worst is much worse...
-
CBe careful with capacitors that could be holding a charge.
-
CHey folks just found this forum. i see a lot of the questions I have so a lurking I will go! I work as the Technical Director of an...
-
Ccbrandt replied to the thread Martin Sues ETC for Patent Infringement.This strikes me as a "defend your patent or lose it" lawsuit.
-
Ccbrandt replied to the thread Martin Sues ETC for Patent Infringement.Ahh, for the yoke handles. I hadn't realized that the patent hadn't expired for those.
-
CUpdate: All's well that ends well. Found the issue.Much texting back and forth, but as @cbrandt noted--it's all about the...
-
Ccbrandt reacted to gafftapegreenia's post in the thread Conventional Fixtures Micro Ghost Lights with
Like.
That would print up clean on a desktop resin printer. -
Ccbrandt reacted to ChrisB_SanDiego's post in the thread Conventional Fixtures Micro Ghost Lights with Like.
Maybe a little unconventional, but I vote you braze it, and possibly leave the metal unfinished. It'll be more personal, and after time...
-
Ccbrandt replied to the thread Martin Sues ETC for Patent Infringement.Those PDFS seem to be behind a paywall, any chance you can sum it up for us?
-
CHaving managed a regional audio/LX shop... if we'd forgotten something critical you ordered I'd personally drive it to you if necessary...
-
Ccbrandt replied to the thread I-Cue, PATCHING PAN AND TILT.Send us more pictures! Pictures of the IQ where the DMX address is, the power supply, how it is plugged in can go a very long way...
-
Ccbrandt replied to the thread Conventional Fixtures Altman 1000 followspot operation/questions.even if you leave the other colors empty, it is often nice to have a light hampshire frost/diffusion to soften the edges, and a CTO to...
